How to install BMX Bike Pegs

BMX bike pegs, the variety of acrobatics that BMX bike riders may pull off is increased by pegs. If you enjoy performing tricks or grinds, BMX bike pegs are a fantastic addition to your BMX bike, but not all models come with a set. In simplest terms, bike pegs are the tiny cylinders that protrude from either side of the wheel axle. Pegs enable riders to balance themselves over the wheel whether they are used on the front, back, or both. They have a more stable foundation for improved bike control while performing certain moves when they put their feet on the pegs

Table of Content

In this guide we have covered the following areas for BMX bike pegs:

  1. Best BMX Bike Pegs
  2. Pegs Build
  3. BMX Bike Pegs (Side Selection)
  4. Tools you need
  5. Steps to put pegs on BMX bike
  6. Result
  7. Pegs on BMX Bike FAQs
How to install BMX bike pegs

Best BMX bike pegs:

Pegs give BMX riders access to a variety of tools, particularly when performing tricks like grinds. Even though some BMX bikes already have pegs, you frequently must purchase them as separate extras. If so, keep in mind the following as you consider your options:









8.75 oz / 248 gm

4” / 100 mm

1.3” / 33 mm



Chromoly Core

w/plastic sleeve

7.4 oz / 210 gm

4.5” / 114 mm

1.5” / 38 mm

25 Nine

Aluminum Core

w/plastic sleeve

4.8 oz / 136 gm

4.33” / 110 mm

1.5” / 38 mm

25 Nine


4.4 oz / 124 gm

4.33” / 110 mm

1.5” / 38 mm



8 oz / 227 gm

4.33” / 110 mm

1.5” / 38 mm



2 oz / 58 gm

4” / 100 mm

1.1” / 28 mm

Pegs Build

Typically, pegs are constructed of an aluminum alloy or chromoly steel. Aluminum is lighter but more expensive than steel, which is a robust material. Although the pegs themselves are made of metal, rubber can be used for the surfaces to improve traction. Riders seeking longer or smoother grinds can also choose from replaceable nylon or plastic sleeves.

Typically, pegs are constructed to match the 14mm-wide axles found on most freestyle bikes. For the larger 3/8in axles on those models, adapters are available if your child wants to test them out on a race BMX.

BMX bike pegs (side selection)

Beginners should install pegs on their bikes when they are entirely at ease, making sure they don’t need them to look down at their feet as they move to and from the peg. I’d suggest installing four pegs on your bike and practicing grinds and street acrobatics to get accustomed to them.

The BMX rider’s preference typically dictates which side the BMX bike pegs go on; comfort and control are crucial factors in determining which side the BMX bike pegs go. BMX bike pegs are often mounted on the side opposite the rider’s forward-facing foot. When coasting, the rider’s right foot should be mostly pointed forward; hence pegs should be installed on that side.

Tools you need:

  • Ratchet and Extension pole
  • 17 or 19mm socket wrench
  • Screw drivers
  • Optional work stand

Steps to put pegs on BMX bike:

  1. Bolt removal: Use your bike stand or work stand if you have one; if not, simply turn your bike upside down. You can start by taking off the front nut or bolt from the hub. To prevent stripping its threads, you must apply a small amount of lubricant.
  2. Peg on axle: Put the nut inside your socket and then attach the peg to the axle. Finding it on the axle and tightening it down will be simpler as a result. If your peg has bolts, you must insert the bolts into the socket with the peg on top.
  3. Tighten Pegs: Now you just need to tighten the socket after guiding it into the hub. If you’re working on the bike’s rear, don’t loosen both nuts and bolts at once to prevent shifting the chain tension and, if it has a quick release, the rear wheel or tyre.


Use rear axles if you wish to attach pegs to the back wheel, and front axles if you want to attach pegs to the front wheel. Bicycle pegs can be produced of a variety of materials and weights in addition to the typical axle size, including aluminum alloy.

BMX bike pegs can be utilized to their full potential by riders who enjoy riding on the street and rail.

Pegs on BMX Bike FAQs:

Garmin FAQs:

Can you add pegs to any BMX bike?

Any freestyle BMX bike will likely support pegs, it can be assumed. There’s a potential that a BMX race bike you buy won’t support pegs because racing BMX places a greater emphasis on lightness than freestyle BMX. No, putting on pegs requires a specific kind of axle.

Are BMX bike pegs universal?

Pegs can be found in the 10mm (3/8″) and 14mm diameters that correspond to BMX axles. To avoid producing two distinct sizes, most pegs are now supplied with 10mm adapters and are 14mm in diameter. Finally, Pegs are often sold singly. So, if you order one, you’ll get one like that.

Can person ride on bike pegs?

A passenger on a bicycle is riskier to ride than on bike pegs. The cyclist may safely steer the bike in any direction because they have a great vision of everything in front of them. Additionally, the risk of injury to the passenger is not very significant when the driver must suddenly stop.

What ride should i put my BMX pegs on?

It’s what makes you feel more at ease. In your instance, often people would put it on the left, but I would try the pegs on both sides to see which side you prefer. However, typically people put it opposite of their drive side.

Do BMX bike pegs fit all types of BMX?

Pegs are not permitted on all BMX bike models. Due to the tight curves and shoulder-to-shoulder nature of racing circuits and racing action, pegs would be too dangerous in the event of crashes for BMX bike racers to use on their bikes.

Are all BMX pegs the same?

There are primarily two sorts of pegs, the first of which is plastic. Nylon sleeves on Plastic Pegs allow them to move easily across a variety of surfaces. These pegs still have metal inner cores; some manufacturers choose chrome, while others choose lighter aluminium.

Are BMX pegs universal?

The majority of bike pegs have a standard axle size that fits the 14 mm axle found on the majority of street and park bikes. Additionally, there are bike pegs made to meet the 3/8 inch axle standard used by racing bikes.

Why do BMX bikes have pegs?

Pegs enable riders to balance themselves over the wheel whether they are used on the front, back, or both. They have a more stable foundation for improved bike control while performing certain moves when they put their feet on the pegs.

Can u put pegs on a mountain bike?

As long as a mountain bike has a bolt-on axle that is long enough, pegs can be installed. Unfortunately, since mountain bikes are not designed for pegs, adding pegs could harm the bike’s fork and frame.

Can you add pegs to a beach cruiser?

The installation of pegs on a cruiser bike is possible as long as the hubs have solid axles or female BMX axles. If the cruiser bike has conventional hollow axles, the quick-release lever makes it difficult to instal pegs, making them unsafe to use.

Contact Us

If you have any suggestions or advise, please feel free to reach us via our Contact Us here.